R220 Reader

Air interface protocol GS1 / EPCglobal UHF Gen2 (ISO 18000-6C) / RAIN RFID antenna ports 2 ports, and impinj reader antenna matching (RP TNC interfaces) covering performance low cost of deployment, or more targeted application transmit power +10.0 -31.5dBm (POE) (EU1 limit output + 30dBm) maximum receiving sensitivity -84dBm minimum return loss of 10dB application Interface OctaneSDK: Java, c # development of library management console R NTP time synchronization

Air interface protocolGS1 / EPCglobal UHF Gen2 (ISO 18000-6C) / RAIN RFID
Antenna port2 ports, and impinj reader antenna matching (RP TNC connector)
performanceCovering the deployment of low cost or more targeted application
Transmit power+ 10.0-31.5dBm (POE) (EU1 limit output + 30dBm)
Maximum receiver sensitivity-84dBm
Minimum Return Loss10dB
Application InterfaceOctaneSDK: Java, c # development library
Management ConsoleRS-232 (Cisco cable management, DB-9 turn RJ-45)

USB device (Type B) and USB Host (Type A)

Embedded applications can access USB virtual serial port and USB Flash Memory

GPIO4 inputs, optically isolated 3-30V, 4 outputs, optically isolated 0-30V, non-isolated 5V, 100mA drive (DB-15)
powered by

Power over Ethernet (POE) IEEE 802.3af

Power supply, LPS / Class2,24V DC output, rated current greater than 2.5A

IP ratingIEC IP52
Anti-vibration levelMil-Std-810G recognize
Electronic Security LevelUL certification (USA and Canada), EN60950-1: 2006 / A11: 2009 / A1: 2010 / A12: 2011
Operating temperature-20 ℃ - + 50 ℃
humidityRelative humidity 5% -95%
Dimensions and weight19 (H) X17.5 (W) X3 (D) cm (7.5X6.9X1.2inch); 680g (1.5 lbs)
RoHSIn line with EU 2011/65 / EU